5.5 Inch LS055R1SX03 LCD Module Screen Display+HDMI to MIPI Driver Controller Board for 3D Printer
Module size: 70.94mm * 128.26mm * 1.35mm (excluding I/F-FPC and electronic components)
Effective area size: 68.04mm * 120.96 mm
Pixel spacing: 0.04725mm x 0.04725 mm (538ppi)
Resolution: 1440 * 2560
Color pixel arrangement: RGB vertical stripes
Display mode: transmission mode, constant black mode, in-plane switching mode.
Number of colors: 16,777,216 colors
Backlight: light emitting diode (LED), 14LED is 2 parallel, 7 series connection
Backlight current: 20mA / LED (typical value)
Supply voltage: AVDD = 5.5 + / – 0.1V AVEE = -5.5 + / – 0.1V
Interface I/O power note (1): VDDI = 1.8 = / 0.1V must provide VVDI with the same voltage as the "H" level of the customer interface signal
LCD driver IC: (power and power IC:Renesas SP Driver Inc.)
Interface: MIPI_DSI video mode (4-Lan x2-port)
Inversion method: column inversion
Surface treatment: HC- polarizer (hardness: 3H)
Package size: 230*180*30mm/9.05*7.08*1.18''
Type: A( LCD Module Screen Display),B(HDMI to MIPI Driver Board),C(Display+HDMI to MIPI Driver Board)
1. You can easily remove backlight to build 3D printers or video projectors and DIY projectors!
The refresh rate is 50HZ – 60HZ. We usually send 50HZ. If you need a
refresh rate of 60HZ. Please comment and make sure your computer
3. For data list and any questions, please do not hesitate to contact us.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x LS055R1SX03 LCD Module Screen Display
1 x LS055R1SX03 Driver Controller Board