Aluminum Radiator Heat Sink PCB Heatsink+2pcs Thermal Conductive Plasters

Price:
$5.29

Free Shipping

Product Description:

Aluminum Heat Sink 100x60x10mm PCB Heatsink Cooler Radiator+2pcsThermal Conductive Heatsink Plaster Adhesive Cooling Paste
Aluminum Heat Sink Specification:
Material:Aluminium
Color: Silver(NO Oxidation), Blue(Oxidation), Gold(Oxidation)
Size:100 x 60 x 10mm/ 4" x 2.4" x 0.4" (L*W*H)
Weight: 79g
Tooth number:16
Tooth thickness: 1mm
Baseplate thickness: 2.2mm
Tooth pitch: 3.8mm

Warm Tips:
1. Use heatsink adhesive glue to install heatsink. Glue is not included here.
2. Please check the specification table and make sure that the size of the heatsink fits that of your component.

Thermal Conductive Heatsink Plaster Features:
1. It has good conductivity and wide service temperature range(-60~200℃), short term 300℃ high temperature.
2. The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free.
3. It can be applied safely in elastic adhesion, heat dissipation, insulation and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.
4. It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

Thermal Conductive Heatsink Plaster Specifications:
Product weight: 5g
Quantity: 1pc, 2pcs
Heat conductive adhesive :white paste
Thermal conductivity >0.671W/m.k
Breaking strength 1.5MPA
Surface vulcanization time 10MIN /25℃
Application: directly bonded solid components, LED and heat dissipation devices, etc.
Use for : Chip, CPU, Memory, North bridge, South bridge, VGA card, Other heat dissipation part

Thermal Conductive Heatsink Plaster Operation Manual:
1. When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.
2. The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
3. Recommended coating thickness: 0.1-0.5mm, the thinner the better.
4. Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.

Package Content:

1 x Aluminum Heat Sink
2 x Thermal Conductive Heatsink Plasters

Aluminum Radiator Heat Sink PCB Heatsink+2pcs Thermal Conductive Plasters
Aluminum Radiator Heat Sink PCB Heatsink+2pcs Thermal Conductive Plasters
Aluminum Radiator Heat Sink PCB Heatsink+2pcs Thermal Conductive Plasters