Mini Wireless Bluetooth Vibration Gamepad Game Controller for Nintend Switch NS Game Console w/NFC Function
1. For Switch mode:
a. Press Y + Home,nter Bluetooth search mode in 2 seconds, LED 1-LED 4 horse light flashes, and the corresponding channel indicator lights are always on (for Switch host allocation).
b. Synchronized state, or in connection with the host: LED 1-LED 4 horse light flashes.
c. Note: When the handle is in synchronization mode, it will sleep automatically if no synchronization is successful within 2.5 minutes.
2. Android mode:
Press A + HOME and enter Bluetooth search mode in 2 seconds. The LED is LED 2 and LED 3. When matching, the LED flashes and the connection lights are on when successfully.
3. Linking mode:
Press the HOME button for 1 second to wake up the handle. After waking up, it will automatically connect to the matching host. If 10 seconds of connection is unsuccessful, it will automatically sleep. Other keys have no wake-up function.
1. When the handle is turned off, the LED 1-LED 4 flashes slowly when charging, and the LED is full of chargring,lights off.
2. Battery low-voltage alarm: current on-line indicator flashes (fast flash); current channel indicator flashes (slow flash) under charging condition; current indicator is always on when charged.
3. In pairing, recharging or low power, paired, back-to-back LED indication is preferred.
1. The host screen turn off and the handle dormancy automatically. In Bluetooth mode, press the HOME key for 5 seconds and disconnect from the host.
2. Within five minutes, no button is pressed and the sensor is automatically dormant (including the sensor is not moving).
Low voltage alarm:
If the lithium battery voltage is less than 3.55V plus or minus 0.1V, the current flash light indicates low voltage. At the lithium battery voltage is less than 3.45V plus or minus 0.1V, then automatically goes dormant.
Turbo and Auto Turbo functions:
1. In any mode:
a. Press (for the first time) A / B / X / Y / L1 / L2 / R1 / R2 and the Turbo button set the Turbo function (automatically connected when pressed);
b. Once again (the second time), TURBO presses to realize Auto TURBO function (Auto streaming transmission by releasing the button).
c. Once again (the third time) press A / B / X / Y / L1 / L2 / R1 / R2 separately with the Turbo key to clear the Turbo function of a single key;
d. Also press "-" and cross DOWN to clear all Turbo Keys functions.
2. TURBO speed adjustment
a. Adjust: Long press 5S TURBO and then press 3D right to increase the speed by a speed; long press 5S TURBO button and then press right 3D down to the maximum speed
b. The third gear is: 5 times per second in a row (level 1), 12 times per second in a row (level 2), 20 times per second in a row (level 3);
c. Note: the Turbo function has no memory and no LED indicator. The screen capture button in PC and android mode has no function.
1. Mode of operation: The host for SWITCH plug is automatically recognized as the for SWITCH, and the PC plug is the standard XINPPUT mode.
2. USB LED indicator: for SWITCH: distributed by the host; XINPUT: LED1, LED4.
3. PC-USB upgrade: press L3 in the stop state and then insert PC-USB into the upgrade state. Open the software upgrade and upgrade the software handle according to the steps of the operation.
Turning off the power: below 15uA
Current pairing: 30 ~ 60mA
Operating current (NFC off): 20 ~ 30mA, NFC on 80 ~ 90mA
Charging current: 150 ~ 200mA
Packaging size: 150mm*95mm*64mm/5.9*3.74*2.51''
Packing weight: 221g
Please allow 1-3cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x Wireless Gamepad
1 x 1.2m Type-C Charging Cable
1 x User Manual