Multi-functional Electric Motor Shaft Mini Chuck Fixture Clamp 0.5-3.2mm Drill Bit Micro Chuck Fixing Device
The multi-function chuck can be used by screwing directly on the output shaft of the small flexible shaft, which is simple and convenient without any auxiliary tools.
The clamping area of the chuck is 0.5-3.2mm, which solves the problem of the single size of the chuck in the past.
Product material: plastic + metal
Product size: 25*10mm/0.98*0.39"
Product weight: 6g
Special reminder: you must see clearly whether the model is in line with your machine before purchase.
Electric grinder suitable for main shaft 8mm/0.31".
The chuck can hold 0-3.2mm range.
This chuck is only suitable for the use of DAMEI electric mill and SLITE electric mill.
Multi function chuck specification: 8*0.75 (photo only demonstration, not included).
The diameter of the output shaft of the electric mill and the flexible shaft is 7.9mm/0.31".
If the housing at the head position is hollow between the output shaft and the casing, the length of the output shaft protruding outside must be greater than 10 mm/0.39".
If the housing in the head position is close to the output shaft and solid, the length of the output shaft protruding outside must be greater than 13 mm.
On the small soft shaft, the hollow part between the handle of the soft shaft and the output shaft must be larger than 13.8mm/0.54".
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
1 x Chuck