The signal extension of wireless detector extends the signal without interference 2000m.
The intelligent wireless signal transfer device is a relay transmission device for wireless signal.
It uses intelligent microcontroller technology to automatically learn the address code and data code of the PT2262 series (315MHZ or 433MHZ) remote control signal, and increase the power forward to achieve the function of increasing the transmission distance.
The use of remote control equipment or wireless burglar alarm system in factories, workshops, buildings and villas often occurs when the remote control distance is too short or is unreliable by the remote control.
The use of intelligent wireless signal transfer device can solve this problem well.
The intelligent wireless signal transfer device uses the DC 12V working voltage (polarity inside positive and negative), when the 12V power is connected, the green light emitting diode is lit, and after receiving the required remote control signal, it will immediately carry on the high power forward, indicating that the lamp becomes orange, and the launch time will be different according to the difference of the oscillating electrical resistance, generally 3~6 Seconds.
Working frequency: 315MHz
Working voltage: DC12V
Standby current: 6mA
Working current: 150mA
Transfer distance: 2000m
Modulation method: AM
Specification: 5.8 x 9.5 x 2.2mm/0.23 x 0.37 x 0.09"
The wireless transfer device produced by our company can transmit the wireless signal of the AM modulation mode of 315MHZ (special frequency customizable).
The forwarding distance without interference can reach 2000m.
The corresponding relationship of specific forwarding can be adjusted by the dialing switch.
The 1 foot of the dial switch is the empty foot, and the 2 foot of the dial switch is the test foot of our company. The transformation of 3 feet and 4 feet can turn to different IC and different shock resistors.
1 x Signal Repeater