The wide voltage design can be applied to 12-50 volt power supply, and is widely used in various equipment control.
The unique mode switch button is convenient for the controller to switch freely between the preset point movement, self lock, interlock and delay of 5 seconds without using the soldering iron or the plug jump cap.
The simple and practical software programming realizes the two relay learning respectively, which can match any key control of the same frequency and any style. It is very convenient for the user to expand the application when using one or more control.
Application scene: Automobile / motorcycle / electric vehicle modification; LED lamp / courtyard lamp control; electric door remote control modification; door control control; electric curtains and other motor positive and reverse control; and other intelligent control and security alarm field.
Working voltage: DC12V-48V
Working temperature: -20℃~60℃
Working frequency: 433MHZ (315MHZ customizable)
Receiving sensitivity: ≥-105dB
Output mode: point movement, self lock, interlock and delay adjustable.
Telecontrol distance: 1000 meters
Controller size: 83*56*28mm/3.27*2.2*1.1"
Control board: 68g
Controller material: ABS
Learning, removing methods and steps:
1. Key function:
The two buttons on the controller are learning buttons (LEARNING) and mode switching keys (MODEL) respectively.
2. Learning methods:
Press a study key, indicating the light flicker (entering the learning state), press any key of the remote control, indicating the light flash three, indicating the No. 1 relay to learn successfully; press the two learning key, repeat the above steps, study the number two relay;
3. Mode switching: (all relays are closed, operation can be disconnected before power up again).
Click: click the mode toggle the button, and the indicator lights flicker once, then extinguish, indicating that the setup is successful.
Interlock: toggle the button according to the two mode; the indicator lights flicker two times and then extinguish, indicating that the interlock is set successfully.
Self lock: press the button under the three mode, the indicator lights flicker three times, and the self lock is set successfully.
Delay for 5 seconds: switch button according to four mode; indicator light flicker four times and extinguish, indicating delay setting is successful.
4. Clear code: long press button and light is always bright.
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
1 X DC12V-48V Universal 2 Way Wireless Remote Control Switch
1 X Remote Control