DC Power Charger Adapter 10A 110V 220V to 12V for LED Strip Light with 5050 3528 Cable Connector
1. International general AC input voltage range.
2. Small volume, light weight, high efficiency.
3. Short circuit / overload / overvoltage protection.
4. Fully isolated plastic cover.
5. Air cooling.
6. Starting updisplay (light emitting diode)
7. 100% full load burning machine aging test.
8. Low power consumption and high reliability.
DC output voltage: 12V
Rated output current: 10A
Output current range: 0-10A
Output power: 120W
Ripple and noise: 200mVp-p
Output voltage tolerance:±5%
Incoming Line stability: ±1%
Load stability: ±2%
Start / up / hold time: 500ms/20ms/30ms 230VAC 500ms/30ms/20ms, 115VAC
Input current: 0.5A/115V 0.25A/230V
Impact current: 25A/115V50/230V
Leakage current: < 1mA/240VAC
Overload protection: 110% to 135% of rated output power and overload protection.
Protection mode: hiccup mode, load exception conditions can be automatically restored after removal.
Overvoltage protection: 130%~150% rated output voltage
High temperature protection: RTH3≥65℃~70℃cut output
Working temperature and temperature: -10℃~ 60℃,20%~90%RH
Storage temperature and temperature: -20℃~85℃,10%~95%RH(without condensation)
Aseismic property: 10 ~ 500Hz, 2G 10min, /1 cycle, time 60 min each axis.
Input and ground: 1.5KvAC
Output and ground: 0.5KvAC
Isolation resistor: input and output, input and ground.
Output and ground: 500VDC/100M Omega
1. All parameters are measured at 230V input, at rated load and 25℃.
2. Ripple and noise voltage are measured in the 20MHz bandwidth oscillograph with 0.1U and 47U capacitors at the end of 12 inch twisted pair wire.
3. Tolerance includes voltage tolerance, circuit stability and load stability.
4. Incoming voltage stability test: minimum voltage to maximum voltage at full load.
5. Load stability test: load from 0% to 100%.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x US Power Charger
1 x Power Cable